License Manager

  • License Manager
    Use License Manager to read the licenses programmed to a software key, generate update requests, and apply update strings with new software licenses.
    • Version 1.1.0 - 173 MB - Released 2018-03-27

      [NEW] Official Windows 10 support
      [NEW] Automatic software key updates
      1.0.6 - (4/26/16)
      [NEW] Removed license expiration date to reflect new software sales model
      1.0.5 - (9/2/14)
      [NEW] Automatic checking for software updates
      1.0.4 - (7/29/14)
      [FIXED] Fixed bug with checking serial number length
      [NEW] Return serial number as current license from empty software key
      1.0.3
      [FIXED] Fixed bug with enforcing 12-digit serial number length
      1.0.2
      [NEW] Support for software keys with maintenance contract expiration dates
      [NEW] Display of expiration dates
      [FIXED] Fixed bug with programming "empty" software keys
      1.0.0
      [NEW] Initial release
      [NEW] Allows display and updating of software key contents

Acquisition

  • BioLab
    BioLab is a free application to acquire, view, edit, and export data from MindWare hardware. Note: BioLab 3.1+ requires 3.1+ Analysis Applications due to a change in file format.
    • Version 3.4.0 - 449 MB - Released 2020-09-15

      [NEW] Support for Mangold Video Sync Pro for audio/video recordings. Fully control recording and load scenarios for synchronous A/V capture
      [NEW] Improved error detection for incorrectly formatted summary event files
      [NEW] Current IP address visible on the configuration screen
      [NEW] More intuitive start/stop button appearance on the acquisition screen

    • Version 3.3.1 - 448 MB - Released 2017-10-31

      [FIXED] Timing discrepancy between real time event log and stored asynchronous digital events
      [FIXED] Spelling error in "Acquisition Start" event name
      [FIXED] Chart height not updating when viewing files

      3.3.0 (2017-03-21)
      [NEW] Integration with Noldus Media Recorder for digital video recordings
      [NEW] Support for loading user config files (.mwcfg) created in BioLab 3.1 & 3.2
      [NEW] Support for opening user configuration files (.mwcfg) created on different computers/user accounts
      [NEW] Support for remote control and event marking via UDP port 1776 using text-based command set
      [NEW] Added support for event detection on the Bio 2 channel on the MW Mobile (for use with external system synchronization such as eye trackers)
      [NEW] Support for events sent in WiFi mode from MindWare Mobile A & B buttons
      [IMPROVED] Video windows can be set to behave like a normal window, or always appear on top of the Acquisition screen
      [FIXED] Proceeding to the Preview Channels screen too quickly after connecting a MindWare Mobile causes disconnection
      [FIXED] Opening a file while in Ambulatory WiFi mode, viewing it, and returning to the Setup screen produces an error
      [FIXED] Disconnection of a MindWare Mobile on the Channel Preview screens can cause the application to lock up when returning to the Setup screen

    • Version 3.2.1 - 447 MB - Released 2016-06-28

      [FIXED] Time slider occasionally disabled even when video is not playing
      [FIXED] Cannot save new filters in files created on MW Mobile in local mode

      3.2.0 (2016-05-31)
      [NEW] Connect and collect data from a MindWare Mobile without the need for a BioNex chassis
      [NEW] BioLab no longer requires a MindWare Software Key to run
      [NEW] New "Previous" and "Next" buttons in Viewer allow for segment-based navigation of data
      [IMPROVED] Improved Viewer controls and layout
      [IMPROVED] Improved video alignment tool allows for precise alignment between data and multiple videos
      [IMPROVED] Improved tool for aligning video(s) with physiology by adjusting video offset while looking at data
      [IMPROVED] Added support for additional video playback types
      [IMPROVED] View mode supports displaying data in both absolute and relative time
      [FIXED] Fixed issue where video files are occasionally not saved in Epoch mode on certain computers
      [FIXED] Improved Asynchronous Individual event timing

    • Version 3.1.2 - 353 MB - Released 2016-06-02

      [IMPROVED] Improved video recording quality on Windows 7 32-bit systems
      [FIXED] Synchronous event channels collected using Digital IO 1 port on 8-slot can be viewed alongside video (no analog data channels required)
      [FIXED] Building an MWI file for an MWX file which is already open returns an error

      3.1.1 (2015-02-25)
      [NEW] Can read files acquired using the new IMP 2 module (50-371135-00)
      [IMPROVED] Increased axis font size on overlayed chart for improved readability
      [IMPROVED] Audio source can be selected by clicking on the desired video during file playback
      [FIXED] Low Pass filters applied post-acquisition not correctly applied
      [FIXED] Event Export from MW Mobile Local file does not take into account Daylight Savings Time
      [FIXED] Fixed bug with duplicate Epoch names. Duplicate epoch names are now appended with a sequential number
      [FIXED] Fixed problem with High/low cutoff settings when switching from 50/60hz notch filter to any other filter type
      [FIXED] Audio preview remains active after acquiring a video until video preview opened and closed again
      [FIXED] Fixed bug with applying Daylight Savings Time to exported event files
      [FIXED] Fixed issue with exporting events from a file created using local mode on a MW Mobile
      [FIXED] Fixed bug with video system setting not being stored properly
      [FIXED] Fixed bug where trend numerical indicator is not shown when only 1 trend is enabled
      [FIXED] Video resolution setting not saved properly when modified
      [FIXED] Video recording indicator on Acquisition Screen always displayed "Video OFF" even when recording video.

      3.1.0 (2014-09-02)
      [NEW] Support for the MindWare Mobile Impedance Cardiograph
      [NEW] Windows 8.1 compatibility (non-video acquisition)
      [NEW] Read/write new MWX/MWI file format
      [NEW] Export events from MWX/MWI file to text event file
      [NEW] Build MWI files from MWX files created on MW Mobile in local mode
      [NEW] Automatically check for software updates
      [IMPROVED] Improved stability and performance

    • Version 3.0.13 - 244 MB - Released 2011-09-06
  • Mobile Firmware
    See KB0011 for instructions on updating Mobile firmware.
    • Version 1.4.1 - 683 KB - Released 2017-09-19

      [FIXED] Rare false detection of error 115 in Local mode causes acquisition to end abruptly
      [FIXED] Display issues on "Date & Time" screen when using 24 Hour time

      1.4.0 (2017-03-21)
      [NEW] The mobile can be configured to transmit events via Wifi when the A and B buttons are pressed during acquisition
      [NEW] The Bio2 channel can be configured to detect events from external hardware and transmit them in Wifi mode
      [NEW] In local mode, the Bio2 channel can be configured to detect incoming events and trigger the start of data acquisition

      1.3.0 (2016-05-31)
      [IMPROVED] More robust wireless communications, improved network roaming capabilities (requires BioLab 3.2.0 or later) 
      [IMPROVED] Improved error handling when storing data locally to SD card
      [NEW] Updated WiFi radio firmware
      [NEW] MAC address of unit now visible on About screen

      1.2.0 (2015-03-31)
      [NEW] Device name length no longer fixed to 8 characters
      [NEW] Support for PEAP/LEAP network authentication protocols (Beta)
      [FIXED] Real Time Start from 12:00PM-12:59PM was interpreted as midnight, rather than noon

      1.1.0 (2014-10-13)
      [NEW] Addition of Mobile Recorder support

      1.0.0 (2014-09-02)
      [NEW] Initial release
      [IMPROVED] Show password instead of hiding with *** characters
      [IMPROVED] Remove leading zeros from IP address display
      [IMPROVED] Added loading screen when switching between programs
      [IMPROVED] Improved battery charge estimation algorithm
      [FIXED] Bug fix for multi-line string printing

Analysis

Try the 3.2+ applications for free using demo data today! Earlier versions require a license to operate and a license is needed for 3.2+ to analyze your own data.
Existing customers can use the License Manager to determine which licenses are on a key and contact us to purchase or upgrade.
Note: We recommend performing major software upgrades only between studies.

  • Basic Signal Analysis (BSA)
    • Version 3.2.4 - 278 MB - Released 2019-04-16

      [FIXED] UDP event names not displayed properly
      [FIXED] Incorrect scaling applied when using BioLab filter
      [FIXED] Digital event value (amplitude) with .mwi files incorrect

      3.2.0 (10/30/18)
      [NEW] Official Windows 10 Support

      Setup
      [NEW] Streamlined events and modes setup with new options available
      [NEW] Add multiple event sources to use events from a variety of systems
      [NEW] Show events for reference when analyzing in Time mode
      [IMPROVED] More flexible event-based analysis, including the option to split an event-based segment into multiple smaller segments
      [IMPROVED] Improved Multi-Event (previously “Event to Event”) analysis support, allowing for quicker analysis of multiple event combinations
      [IMPROVED] Improved AcqKnowledge file read - files no longer need to be re-scaled or re-sampled before opening in MindWare
      [IMPROVED] Streamlined channel mapping emphasizes the use of edit files
      [IMPROVED] New edit file format stores important settings needed to reproduce the edited data. These settings are automatically recalled when the edit file is loaded

      Analysis
      [IMPROVED] Improved ECG R peak detection using the Shannon Energy Envelope technique
      [IMPROVED] Improved Blood Pressure/PLE peak and trough detection with additional noise rejection
      [NEW] Keyboard shortcuts for writing segments and searching through the file for points of interest such as an unwritten segment

      Editing
      [NEW] Insert/delete individual peaks and troughs on applicable signals
      [NEW] Undo/redo edits
      [NEW] Save edits as you analyze instead of just when you are done
      [IMPROVED] Expanded insert/delete all options using cursors
      [NEW] New channel display options
      [IMPROVED] Edit all channels simultaneously, or apply edits to each channel individually
      [IMPROVED] Keyboard shortcuts for selecting graph tools and scrolling through data

      Output
      [NEW] Write Excel output files without having Excel installed
      [IMPROVED] Open an existing output for a given data file during analysis to continue writing to it in a new session. Automatically detect which segments have already been written

    • Version 3.1.5 - 199 MB - Released 2017-08-22

      [FIXED] MESA events are incorrectly interpreted and displayed
      [FIXED] Time & Event mode produces an extra (empty) segment when the first segment exceeds the end of the file
      [FIXED] Auto-analyze only outputs first segment statistics

      3.1.4 (12/20/16)
      [IMPROVED] MindWare event files (_event.txt) can be used when analyzing MWX/MWI files
      [FIXED] Loading a user configuration file in Event & Time mode can cause segmentation issues
      [FIXED] Setting a negative video offset whose absolute value is greater than the segment size would cause playback issues

      3.1.3 (4/26/16)
      [FIXED] Fixed bug which caused occasional edit file corruption. Edit file corruption will now be detected and dealt with when edit file is loaded.

      3.1.2 (7/21/15)
      [FIXED] Fixed issue where digital events near end of AcqKnowledge (.acq) files are sometimes not detected
      [FIXED] Fixed problem with applying Daylight Savings Time to license expiration dates
      [FIXED] Fixed bug with applying Daylight Savings Time to exported event files
      [FIXED] BioLab filters can be used with MWX/MWI files in the analysis applications. The "Use BioLab Filter" option is now stored in the user preferences file.

      3.1.1 (12/2/14)
      [NEW] Application can be installed silently
      [IMPROVED] Installer digitally signed to prove authenticity
      [IMPROVED] After channel re-map, edit file is checked again to ensure channels correspond
      [IMPROVED] After channel re-map, if event channel has changed then events are redetected
      [IMPROVED] Added ability to select audio source by clicking on video stream (only 1 audio stream at a time)
      [IMPROVED] Forced videos to maintain aspect ratio when resized
      [IMPROVED] Added check to make sure channel names are valid Excel worksheet names
      [IMPROVED] Added description to Event Mode control
      [FIXED] Fixed bug with user-defined events and "All Instances" unchecked and there are duplicate events in the event list
      [FIXED] Fixed false positive error when checking if mapped channels match channels in edit file
      [FIXED] Fixed bug with quad video playback where 4th video did not play
      [FIXED] Fixed issue with displaying "Microsiemens" units label

      3.1.0 (9/2/14)
      [NEW] Windows 8.1 compatible
      [NEW] Excel 2013 compatible
      [NEW] Screen resizing on Analysis and Editor windows
      [NEW] Support for EDF & BDF file formats
      [NEW] Support for MWX/MWI file format (written by BioLab 3.1 and The MindWare Mobile)
      [NEW] Automatically check for software updates
      [NEW] Pre & Post Event mode allows for analysis of Pre- and Post-Event segments separately but during same analysis session
      [NEW] Event to Event + Time mode allows for analysis of data between 2 events in specified time intervals
      [NEW] Select multiple events to use for analysis
      [NEW] Identify events by Type or Name
      [NEW] Support for Noldus style event files
      [NEW] Ability to export events from an MWX/MWI file
      [NEW] Ability to select up to 4 videos for synchronous playback during analysis
      [NEW] Specify an offset for each video independently to correct for video start time offset
      [NEW] Automatic scaling of signals from volts to base units when using MWX/MWI files from The MindWare Mobile
      [IMPROVED] Memory and performance optimization
      [IMPROVED] Support for a variety of video file formats
      [IMPROVED] Support for shorter data segments (size based on sample rate)

    • Version 3.0.25 - 127 MB - Released 2012-08-01

      NOTE: 3.0.x Analysis Applications require data collected with BioLab 3.0.x or earlier

  • Blood Pressure Variability Analysis (BPV)
    • Version 3.2.5 - 298 MB - Released 2019-10-29

      [NEW] Support for .eeg files (Brain Vision, Cognionics, etc)
      [NEW] Support for Mangold INTERACT event import
      [FIXED] Video playback incompatible with Windows 10 on some computers
      [FIXED] Filtering the event list causes issues when selecting events to use
      [FIXED] ASCII-MW Converter can't handle commas in data values
      [FIXED] BioLab filter not stored properly in edit files
      [FIXED] Digital event edge detection defaults to "Both" even when specific edge is selected

      3.2.4 (4/16/19)
      [FIXED] UDP event names not displayed properly
      [FIXED] Incorrect scaling applied when using BioLab filter
      [FIXED] Digital event value (amplitude) with .mwi files incorrect

      3.2.0 (10/30/18)
      [NEW] Official Windows 10 Support

      Setup
      [NEW] Streamlined events and modes setup with new options available
      [NEW] Add multiple event sources to use events from a variety of systems
      [NEW] Show events for reference when analyzing in Time mode
      [IMPROVED] More flexible event-based analysis, including the option to split an event-based segment into multiple smaller segments
      [IMPROVED] Improved Multi-Event (previously “Event to Event”) analysis support, allowing for quicker analysis of multiple event combinations
      [IMPROVED] Improved AcqKnowledge file read - files no longer need to be re-scaled or re-sampled before opening in MindWare
      [IMPROVED] Streamlined channel mapping emphasizes the use of edit files
      [IMPROVED] New edit file format stores important settings needed to reproduce the edited data. These settings are automatically recalled when the edit file is loaded

      Analysis
      [NEW] Improved peak/trough detection with additional noise rejection
      [NEW] Separate metrics for ascending/descending baroreflex series', as well as an average BRS statistic
      [NEW] Keyboard shortcuts for writing segments and searching through the file for points of interest such as an unwritten segment or artifact

      Editing
      [NEW] Insert multiple midbeats at once
      [NEW] Track good vs. estimated vs. artifact systoli/diastoli, with point distribution visible at all times
      [NEW] Undo/redo edits
      [NEW] Save edits as you analyze instead of just when you are done
      [IMPROVED] Expanded insert/delete all options using cursors
      [NEW] New channel display options
      [IMPROVED] Edit all channels simultaneously, or apply edits to each channel individually
      [IMPROVED] Keyboard shortcuts for selecting graph tools and scrolling through data
      [NEW] Click a point on the graph to learn why it is flagged as an artifact

      Output
      [NEW] Write Excel output files without having Excel installed
      [NEW] Edit statistics worksheet contains point distribution and data edits summary
      [IMPROVED]Open an existing output for a given data file during analysis to continue writing to it in a new session. Automatically detect which segments have already been written
      [NEW] Additional BPV-specific editing statistics including duration of estimated peak-peak/trough-trough intervals and % of estimated peak-peak/trough-trough intervals

    • Version 3.1.5 - 199 MB - Released 2017-08-22

      [FIXED] MESA events are incorrectly interpreted and displayed
      [FIXED] Time & Event mode produces an extra (empty) segment when the first segment exceeds the end of the file

      3.1.4 (12/20/16)
      [IMPROVED] MindWare event files (_event.txt) can be used when analyzing MWX/MWI files
      [FIXED] Loading a user configuration file in Event & Time mode can cause segmentation issues
      [FIXED] Setting a negative video offset whose absolute value is greater than the segment size would cause playback issues

      3.1.3 (4/26/16)
      [IMPROVED] Improved peak/trough placement when multiple peaks/troughs are located in edit circle
      [FIXED] Fixed bug which caused occasional edit file corruption. Edit file corruption will now be detected and dealt with when edit file is loaded.

      3.1.2 (7/21/15)
      [FIXED] Fixed issue where digital events near end of AcqKnowledge (.acq) files are sometimes not detected
      [FIXED] Fixed problem with applying Daylight Savings Time to license expiration dates
      [FIXED] Fixed bug with applying Daylight Savings Time to exported event files
      [FIXED] BioLab filters can be used with MWX/MWI files in the analysis applications. The "Use BioLab Filter" option is now stored in the user preferences file.

      3.1.1 (12/2/14)
      [NEW] Application can be installed silently
      [IMPROVED] Installer digitally signed to prove authenticity
      [IMPROVED] After channel re-map, edit file is checked again to ensure channels correspond
      [IMPROVED] After channel re-map, if event channel has changed then events are redetected
      [IMPROVED] Added ability to select audio source by clicking on video stream (only 1 audio stream at a time)
      [IMPROVED] Forced videos to maintain aspect ratio when resized
      [IMPROVED] Added check to make sure channel names are valid Excel worksheet names
      [IMPROVED] Added description to Event Mode control
      [FIXED] Fixed bug with user-defined events and "All Instances" unchecked and there are duplicate events in the event list
      [FIXED] Fixed false positive error when checking if mapped channels match channels in edit file
      [FIXED] Fixed bug with quad video playback where 4th video did not play
      [FIXED] Fixed issue with displaying "Microsiemens" units label

      3.1.0 (9/2/14)
      [NEW] Windows 8.1 compatible
      [NEW] Excel 2013 compatible
      [NEW] Screen resizing on Analysis and Editor windows
      [NEW] Support for EDF & BDF file formats
      [NEW] Support for MWX/MWI file format (written by BioLab 3.1 and The MindWare Mobile)
      [NEW] Automatically check for software updates
      [NEW] Pre & Post Event mode allows for analysis of Pre- and Post-Event segments separately but during same analysis session
      [NEW] Event to Event + Time mode allows for analysis of data between 2 events in specified time intervals
      [NEW] Select multiple events to use for analysis
      [NEW] Identify events by Type or Name
      [NEW] Support for Noldus style event files
      [NEW] Ability to export events from an MWX/MWI file
      [NEW] Ability to select up to 4 videos for synchronous playback during analysis
      [NEW] Specify an offset for each video independently to correct for video start time offset
      [NEW] Automatic scaling of signals from volts to base units when using MWX/MWI files from The MindWare Mobile
      [IMPROVED] Improved BP editing tools
      [IMPROVED] Additional statistics written to output file
      [IMPROVED] Memory and performance optimization
      [IMPROVED] Support for a variety of video file formats
      [IMPROVED] Support for shorter data segments (size based on sample rate)

    • Version 3.0.25 - 127 MB - Released 2012-08-01

      NOTE: 3.0.x Analysis Applications require data collected with BioLab 3.0.x or earlier

  • Electrodermal Activity Analysis (EDA)
    • Version 3.2.7 - 303 MB - Released 2020-06-11

      [NEW} Support for subscriptions and virtual perpetual licenses

      3.2.5 (10/29/19)
      [NEW] Support for .eeg files (Brain Vision, Cognionics, etc)
      [NEW] Support for Mangold INTERACT event import
      [FIXED] Video playback incompatible with Windows 10 on some computers
      [FIXED] Filtering the event list causes issues when selecting events to use
      [FIXED] ASCII-MW Converter can't handle commas in data values
      [FIXED] BioLab filter not stored properly in edit files
      [FIXED] Digital event edge detection defaults to "Both" even when specific edge is selected

      3.2.4 (4/16/19)
      [FIXED] UDP event names not displayed properly
      [FIXED] Incorrect scaling applied when using BioLab filter
      [FIXED] Digital event value (amplitude) with .mwi files incorrect

      3.2.3 (10/30/18)
      [FIXED] BioLab filters not applied properly to .mw files
      [FIXED] Dragging multiple event sources into the event source to use table incorrectly calculates the number of events for each source
      [FIXED] Performing a data edit while zoomed in resets the zoom level
      [FIXED] Gain incorrectly read from files created on MW1000A and MW3000A PDA-based instruments
      [FIXED] Open edit file dialog searching for .edi and .edh files instead of .ede

      3.2.2 (7/24/18)
      [FIXED] "Extend >>" edit in Signal Editor incorrectly affects next segment if end time of current segment = start time of next segment
      [FIXED] Deleting a multi-event pair before specifying an end event causes drag and drop glitches
      [FIXED] Loading an edit file from version 3.1 and earlier disables the channel map
      [FIXED] Event settings occasionally not saved properly in the application configuration file
      [FIXED] Incorrectly applying scaling to some channels in AcqKnowledge files
      [FIXED] Incorrectly reading AcqKnowledge files with fractional sample rates (i.e. 62.5 Hz)

      3.2.1 (5/15/18)
      [FIXED] Edits from edit file not applied properly when current segment includes within it a previously edited segment
      [FIXED] "Reset" option for setting video delay to delay determined by Noldus Media Recorder not available for videos 2-4
      [FIXED] Insufficient digits of precision on the X axis for the main signal graph
      [FIXED] Ctrl+H not jumping to the correct locations in the online manuals when used from the analysis screen
      [FIXED] Change "Snap to Peak" text to "Snap to Trough" when working with troughs in the Signal Editor
      [FIXED] Issue reading gain from .mwi files to populate uS/volt setting
      [IMPROVED] Added timeout to adding Digital Event sources to prevent performance issues related to loading too many events (or selecting the wrong channel from which to detect events)
      [IMPROVED] Added support for MP4 and AVCHD video file types
      [IMPROVED] Added warning when exiting Signal Editor if every trough does not have a corresponding peak (or vice versa)

      3.2.0 (3/27/18)
      [NEW] Official Windows 10 support

      Setup
      [NEW] Streamlined events and modes setup with new options available
      [NEW] Add multiple event sources to use events from a variety of systems
      [NEW] Show events for reference when analyzing in Time mode
      [IMPROVED] More flexible event-based analysis, including the option to split an event-based segment into multiple smaller segments
      [IMPROVED] Improved Multi-Event (previously “Event to Event”) analysis support, allowing for quicker analysis of multiple event combinations
      [IMPROVED] Improved AcqKnowledge file read - files no longer need to be re-scaled or re-sampled before opening in MindWare
      [IMPROVED] Streamlined channel mapping emphasizes the use of edit files
      [IMPROVED] New edit file format stores important settings needed to reproduce the edited data. These settings are automatically recalled when the edit file is loaded

      Analysis
      [NEW] Highlight SCRs in graph by selecting them in the SCR Stats table
      [NEW] Identify ER-SCRs based on the first event in the segment, or for any events
      [IMPROVED] Improved SCR stats to include industry standard terminology and output
      [IMPROVED] Keyboard shortcuts for writing segments and searching through file for points of interest such as an unwritten segment or artifact

      Editing
      [NEW] Undo/redo edits
      [NEW] Save edits as you analyze instead of just when you are done
      [IMPROVED] Expanded insert/delete all options using cursors
      [NEW] New channel display options
      [IMPROVED] Edit all channels simultaneously, or apply edits to each channel individually
      [IMPROVED] Keyboard shortcuts for selecting graph tools and scrolling through data

      Output
      [NEW] Write Excel output files without having Excel installed
      [IMPROVED] Edit statistics worksheet contains point distribution and data edits summary
      [IMPROVED] Open an existing output for a given data file during analysis to continue writing to it in a new session. Automatically detect which segments have already been written

    • Version 3.1.7 - 207 MB - Released 2020-06-11

      [NEW} Support for subscriptions and virtual perpetual licenses

      3.1.6 (10/31/17)
      [FIXED] Additional SCRs below uS Threshold may be marked when viewing previously edited data

      3.1.5 (8/22/17)
      [FIXED] MESA events are incorrectly interpreted and displayed
      [FIXED] Time & Event mode produces an extra (empty) segment when the first segment exceeds the end of the file

      3.1.4 (12/20/16)
      [IMPROVED] MindWare event files (_event.txt) can be used when analyzing MWX/MWI files
      [FIXED] Loading a user configuration file in Event & Time mode can cause segmentation issues
      [FIXED] Setting a negative video offset whose absolute value is greater than the segment size would cause playback issues
      [FIXED] Fixed "latency" misspelling

      3.1.3 (4/26/16)
      [IMPROVED] Improved peak/trough placement when multiple peaks/troughs are located in edit circle
      [FIXED] Fixed bug which caused occasional edit file corruption. Edit file corruption will now be detected and dealt with when edit file is loaded.
      [FIXED] Fixed issue where order of peak/trough insertion can lead to false warning of peak and trough mismatch

      3.1.2 (7/21/15)
      [FIXED] Fixed issue where digital events near end of AcqKnowledge (.acq) files are sometimes not detected
      [FIXED] Fixed problem with applying Daylight Savings Time to license expiration dates
      [FIXED] Fixed bug with applying Daylight Savings Time to exported event files
      [FIXED] BioLab filters can be used with MWX/MWI files in the analysis applications. The "Use BioLab Filter" option is now stored in the user preferences file.

      3.1.1 (12/2/14)
      [NEW] Application can be installed silently
      [IMPROVED] Installer digitally signed to prove authenticity
      [IMPROVED] After channel re-map, edit file is checked again to ensure channels correspond
      [IMPROVED] After channel re-map, if event channel has changed then events are redetected
      [IMPROVED] Added ability to select audio source by clicking on video stream (only 1 audio stream at a time)
      [IMPROVED] Forced videos to maintain aspect ratio when resized
      [IMPROVED] Added check to make sure channel names are valid Excel worksheet names
      [IMPROVED] Added description to Event Mode control
      [FIXED] Fixed bug with user-defined events and "All Instances" unchecked and there are duplicate events in the event list
      [FIXED] Fixed false positive error when checking if mapped channels match channels in edit file
      [FIXED] Fixed bug with quad video playback where 4th video did not play
      [FIXED] Changed uS/Volt control increment precision to 0.001
      [FIXED] Fixed issue reading gain from MWX/MWI file (non-MW Mobile)

      3.1.0 (9/2/14)
      [NEW] Windows 8.1 compatible
      [NEW] Excel 2013 compatible
      [NEW] Screen resizing on Analysis and Editor windows
      [NEW] Support for EDF & BDF file formats
      [NEW] Support for MWX/MWI file format (written by BioLab 3.1 and The MindWare Mobile)
      [NEW] Automatically check for software updates
      [NEW] Pre & Post Event mode allows for analysis of Pre- and Post-Event segments separately but during same analysis session
      [NEW] Event to Event + Time mode allows for analysis of data between 2 events in specified time intervals
      [NEW] Select multiple events to use for analysis
      [NEW] Identify events by Type or Name
      [NEW] Support for Noldus style event files
      [NEW] Ability to export events from an MWX/MWI file
      [NEW] Ability to select up to 4 videos for synchronous playback during analysis
      [NEW] Specify an offset for each video independently to correct for video start time offset
      [NEW] Automatic scaling of signals from volts to base units when using MWX/MWI files from The MindWare Mobile
      [IMPROVED] Improved EDA editing tools
      [IMPROVED] Additional statistics written to output file
      [IMPROVED] Memory and performance optimization
      [IMPROVED] Support for a variety of video file formats
      [IMPROVED] Support for shorter data segments (size based on sample rate)
      [IMPROVED] Improved respiration derivation from Zo & dZ/dt

    • Version 3.0.25 - 127 MB - Released 2012-08-01

      NOTE: 3.0.x Analysis Applications require data collected with BioLab 3.0.x or earlier

  • Electromyography Analysis (EMG)
    • Version 3.2.5 - 299 MB - Released 2019-10-29

      [NEW] Support for .eeg files (Brain Vision, Cognionics, etc)
      [NEW] Support for Mangold INTERACT event import
      [FIXED] Video playback incompatible with Windows 10 on some computers
      [FIXED] Filtering the event list causes issues when selecting events to use
      [FIXED] ASCII-MW Converter can't handle commas in data values
      [FIXED] BioLab filter not stored properly in edit files
      [FIXED] Event Source Groups not applied properly when switching between files
      [FIXED] Digital event edge detection defaults to "Both" even when specific edge is selected

      3.2.4 (4/16/19)
      [FIXED] UDP event names not displayed properly
      [FIXED] Incorrect scaling applied when using BioLab filter
      [FIXED] Digital event value (amplitude) with .mwi files incorrect

      3.2.0 (10/30/18)
      [NEW] Official Windows 10 Support

      Setup
      [NEW] Streamlined events and modes setup with new options available
      [NEW] Add multiple event sources to use events from a variety of systems
      [NEW] Show events for reference when analyzing in Time mode
      [IMPROVED] More flexible event-based analysis, including the option to split an event-based segment into multiple smaller segments
      [IMPROVED] Improved Multi-Event (previously “Event to Event”) analysis support, allowing for quicker analysis of multiple event combinations
      [IMPROVED] Improved AcqKnowledge file read - files no longer need to be re-scaled or re-sampled before opening in MindWare
      [IMPROVED] Streamlined channel mapping emphasizes the use of edit files
      [IMPROVED] New edit file format stores important settings needed to reproduce the edited data. These settings are automatically recalled when the edit file is loaded

      Analysis
      [NEW] New EMG startle mode
      ⦁ Specify baseline and analysis windows based on events
      ⦁ Group events by event source or other descriptors (such as valance)
      ⦁ Detect response onset and peak
      ⦁ Mark trials as accepted, no response, and rejected
      ⦁ Average across multiple trials of the same condition to obtain response probability and average response amplitude/magnitude
      [IMPROVED] View all EMG signals side by side for comparison, or individually
      [NEW]Keyboard shortcuts for writing segments and searching through the file for points of interest such as an unwritten segment

      Editing
      [NEW] Undo/redo edits
      [NEW] Save edits as you analyze instead of just when you are done
      [NEW] New channel display options
      [IMPROVED] Edit all channels simultaneously, or apply edits to each channel individually
      [IMPROVED] Keyboard shortcuts for selecting graph tools and scrolling through data
      [NEW] Startle mode - manually adjust onset and peak location

      Output
      [NEW] Write Excel output files without having Excel installed
      [NEW] Edit statistics worksheet contains data edits summary
      [IMPROVED] Open an existing output for a given data file during analysis to continue writing to it in a new session. Automatically detect which segments have already been written

    • Version 3.1.5 - 199 MB - Released 2017-08-22

      [FIXED] MESA events are incorrectly interpreted and displayed
      [FIXED] Time & Event mode produces an extra (empty) segment when the first segment exceeds the end of the file

      3.1.4 (12/20/16)
      [IMPROVED] MindWare event files (_event.txt) can be used when analyzing MWX/MWI files
      [FIXED] Loading a user configuration file in Event & Time mode can cause segmentation issues
      [FIXED] Setting a negative video offset whose absolute value is greater than the segment size would cause playback issues

      3.1.3 (4/26/16)
      [FIXED] Fixed bug which caused occasional edit file corruption. Edit file corruption will now be detected and dealt with when edit file is loaded.

      3.1.2 (7/21/15)
      [FIXED] Fixed issue where digital events near end of AcqKnowledge (.acq) files are sometimes not detected
      [FIXED] Fixed problem with applying Daylight Savings Time to license expiration dates
      [FIXED] Fixed bug with applying Daylight Savings Time to exported event files
      [FIXED] BioLab filters can be used with MWX/MWI files in the analysis applications. The "Use BioLab Filter" option is now stored in the user preferences file.

      3.1.1 (12/2/14)
      [NEW] Application can be installed silently
      [NEW] Added Event channel to raw data output
      [IMPROVED] Installer digitally signed to prove authenticity
      [IMPROVED] After channel re-map, edit file is checked again to ensure channels correspond
      [IMPROVED] After channel re-map, if event channel has changed then events are redetected
      [IMPROVED] Added ability to select audio source by clicking on video stream (only 1 audio stream at a time)
      [IMPROVED] Forced videos to maintain aspect ratio when resized
      [IMPROVED] Added check to make sure channel names are valid Excel worksheet names
      [IMPROVED] Added description to Event Mode control
      [FIXED] Fixed bug with user-defined events and "All Instances" unchecked and there are duplicate events in the event list
      [FIXED] Fixed false positive error when checking if mapped channels match channels in edit file
      [FIXED] Fixed bug with quad video playback where 4th video did not play
      [FIXED] Fixed issue reading gain from MWX/MWI file (non-MW Mobile)

      3.1.0 (9/2/14)
      [NEW] Windows 8.1 compatible
      [NEW] Excel 2013 compatible
      [NEW] Screen resizing on Analysis and Editor windows
      [NEW] Support for EDF & BDF file formats
      [NEW] Support for MWX/MWI file format (written by BioLab 3.1 and The MindWare Mobile)
      [NEW] Automatically check for software updates
      [NEW] Pre & Post Event mode allows for analysis of Pre- and Post-Event segments separately but during same analysis session
      [NEW] Event to Event + Time mode allows for analysis of data between 2 events in specified time intervals
      [NEW] Select multiple events to use for analysis
      [NEW] Identify events by Type or Name
      [NEW] Support for Noldus style event files
      [NEW] Ability to export events from an MWX/MWI file
      [NEW] Ability to select up to 4 videos for synchronous playback during analysis
      [NEW] Specify an offset for each video independently to correct for video start time offset
      [NEW] Automatic scaling of signals from volts to base units when using MWX/MWI files from The MindWare Mobile
      [IMPROVED] Additional statistics written to output file
      [IMPROVED] Memory and performance optimization
      [IMPROVED] Support for a variety of video file formats
      [IMPROVED] Support for shorter data segments (size based on sample rate)

    • Version 3.0.25 - 127 MB - Released 2012-08-01

      NOTE: 3.0.x Analysis Applications require data collected with BioLab 3.0.x or earlier

  • Heart Rate Variability Analysis (HRV)
    • Version 3.2.7 - 303 MB - Released 2020-06-10

      [NEW} Support for subscriptions and virtual perpetual licenses

      3.2.5 (10/29/19)
      [NEW] Support for .eeg files (Brain Vision, Cognionics, etc)
      [NEW] Support for Mangold INTERACT event import
      [FIXED] Video playback incompatible with Windows 10 on some computers
      [FIXED] Filtering the event list causes issues when selecting events to use
      [FIXED] ASCII-MW Converter can't handle commas in data values
      [FIXED] BioLab filter not stored properly in edit files
      [FIXED] Digital event edge detection defaults to "Both" even when specific edge is selected

      3.2.4 (4/16/19)
      [FIXED] UDP event names not displayed properly
      [FIXED] Incorrect scaling applied when using BioLab filter
      [FIXED] Digital event value (amplitude) with .mwi files incorrect
      [FIXED] Continuous analysis mode only works with first subject in file

      3.2.3 (10/30/18)
      [FIXED] BioLab filters not applied properly to .mw files
      [FIXED] Dragging multiple event sources into the event source to use table incorrectly calculates the number of events for each source
      [FIXED] Performing a data edit while zoomed in resets the zoom level

      3.2.2 (7/24/18)
      [FIXED] "Extend >>" edit in Signal Editor incorrectly affects next segment if end time of current segment = start time of next segment
      [FIXED] Deleting a multi-event pair before specifying an end event causes drag and drop glitches
      [FIXED] Loading an edit file from version 3.1 and earlier disables the channel map
      [FIXED] Event settings occasionally not saved properly in the application configuration file
      [FIXED] Incorrectly applying scaling to some channels in AcqKnowledge files
      [FIXED] Incorrectly reading AcqKnowledge files with fractional sample rates (i.e. 62.5 Hz)
      [FIXED] Not properly tracking the low/high X cursors when determining the number of midbeats to insert in Signal Editor

      3.2.1 (5/15/18)
      [FIXED] Edits from edit file not applied properly when current segment includes within it a previously edited segment
      [FIXED] "Reset" option for setting video delay to delay determined by Noldus Media Recorder not available for videos 2-4
      [FIXED] IBI import not functioning due to channel mapping requirements, which don't actually apply to IBI imports
      [FIXED] Insufficient digits of precision on the X axis for the main signal graph
      [IMPROVED] Storing ECG Invert setting in User Preferences configuration file
      [IMPROVED] Added timeout to adding Digital Event sources to prevent performance issues related to loading too many events (or selecting the wrong channel from which to detect events)
      [IMPROVED] Added support for MP4 and AVCHD video file types
      [IMPROVED] Detected R peaks which do not fall directly on a peak are automatically marked as an "estimate"

      3.2.0 (3/27/18)
      [NEW] Official Windows 10 support

      Setup
      [NEW] Streamlined events and modes setup with new options available
      [NEW] Add multiple event sources to use events from a variety of systems
      [NEW] Show events for reference when analyzing in Time mode
      [IMPROVED] More flexible event-based analysis, including the option to split an event-based segment into multiple smaller segments
      [IMPROVED] Improved Multi-Event (previously “Event to Event”) analysis support, allowing for quicker analysis of multiple event combinations
      [IMPROVED] IBI Import Wizard improves flexibility of IBI file format
      [IMPROVED] Improved AcqKnowledge file read - files no longer need to be re-scaled or re-sampled before opening in MindWare
      [IMPROVED] Streamlined channel mapping emphasizes the use of edit files
      [IMPROVED] New edit file format stores important settings needed to reproduce the edited data. These settings are automatically recalled when the edit file is loaded

      Analysis
      [IMPROVED] Improved R peak detection using the Shannon Energy Envelope technique
      [IMPROVED] Determine respiration rate based on HF/RSA frequency band, or a custom band defined in breaths per minute
      [IMPROVED] Keyboard shortcuts for writing segments and searching through file for points of interest such as an unwritten segment or artifact

      Editing
      [IMPROVED] Insert multiple midbeats at once
      [NEW] Track good vs. estimated vs. bad R peaks, with point distribution visible at all times
      [NEW] Undo/redo edits
      [NEW] Save edits as you analyze instead of just when you are done
      [NEW] Expanded insert/delete all options using cursors
      [NEW] New channel display options
      [IMPROVED] Edit all channels simultaneously, or apply edits to each channel individually
      [IMPROVED] Keyboard shortcuts for selecting graph tools and scrolling through data
      [NEW] Click a point in the graph to learn why it is flagged as artifact

      Output
      [NEW] Write Excel output files without having Excel installed
      [NEW] Edit statistics worksheet contains point distribution and data edits summary
      [NEW] Additional HRV-specific editing statistics including duration of estimated R-R intervals and % of estimated R-R intervals
      [IMPROVED] Open an existing output for a given data file during analysis to continue writing to it in a new session. Automatically detect which segments have already been written

    • Version 3.1.7 - 206 MB - Released 2020-06-10

      [NEW} Support for subscriptions and virtual perpetual licenses

      3.1.5 (8/22/17)
      [FIXED] MESA events are incorrectly interpreted and displayed
      [FIXED] Time & Event mode produces an extra (empty) segment when the first segment exceeds the end of the file
      [FIXED] Spelling error on "Manual Override" setting
      [FIXED] Insufficient digits of precision on Threshold setting in Manual Override peak detection

      3.1.4 (12/20/16)
      [IMPROVED] MindWare event files (_event.txt) can be used when analyzing MWX/MWI files
      [FIXED] Loading a user configuration file in Event & Time mode can cause segmentation issues
      [FIXED] Setting a negative video offset whose absolute value is greater than the segment size would cause playback issues
      [FIXED] Fixed bug where using an edit file with Real Time analysis causes issues sometimes

      3.1.3 (4/26/16)
      [IMPROVED] Improved peak placement when multiple peaks are located in edit circle
      [FIXED] Fixed bug which caused occasional edit file corruption. Edit file corruption will now be detected and dealt with when edit file is loaded.

      3.1.2 (7/21/15)
      [FIXED] Fixed issue where digital events near end of AcqKnowledge (.acq) files are sometimes not detected
      [FIXED] Fixed problem with applying Daylight Savings Time to license expiration dates
      [FIXED] Fixed bug with applying Daylight Savings Time to exported event files
      [FIXED] BioLab filters can be used with MWX/MWI files in the analysis applications. The "Use BioLab Filter" option is now stored in the user preferences file.

      3.1.1 (12/2/14)
      [NEW] Application can be installed silently
      [IMPROVED] Installer digitally signed to prove authenticity
      [IMPROVED] After channel re-map, edit file is checked again to ensure channels correspond
      [IMPROVED] After channel re-map, if event channel has changed then events are redetected
      [IMPROVED] Added ability to select audio source by clicking on video stream (only 1 audio stream at a time)
      [IMPROVED] Forced videos to maintain aspect ratio when resized
      [IMPROVED] Added check to make sure channel names are valid Excel worksheet names
      [IMPROVED] Added description to Event Mode control
      [IMPROVED] Changed HF/RSA Band defaults to 0.12-0.4
      [FIXED] Fixed bug with user-defined events and "All Instances" unchecked and there are duplicate events in the event list
      [FIXED] Fixed false positive error when checking if mapped channels match channels in edit file
      [FIXED] Fixed bug with quad video playback where 4th video did not play
      [FIXED] Fixed rounding issues when determining how many intervals are present in a segment (Interval Mode)
      [FIXED] Fixed issue calculating interval stats when last segment contains zero R peaks
      [FIXED] Fixed interval start time calculation when only 1 interval is present in a segment (Excel output)
      [FIXED] Fixed bug where interval start/end cursors become treated as position cursor during video playback

      3.1.0 (9/2/14)
      [NEW] Windows 8.1 compatible
      [NEW] Excel 2013 compatible
      [NEW] Screen resizing on Analysis and Editor windows
      [NEW] Support for EDF & BDF file formats
      [NEW] Support for MWX/MWI file format (written by BioLab 3.1 and The MindWare Mobile)
      [NEW] Automatically check for software updates
      [NEW] Pre & Post Event mode allows for analysis of Pre- and Post-Event segments separately but during same analysis session
      [NEW] Event to Event + Time mode allows for analysis of data between 2 events in specified time intervals
      [NEW] Select multiple events to use for analysis
      [NEW] Identify events by Type or Name
      [NEW] Support for Noldus style event files
      [NEW] Ability to export events from an MWX/MWI file
      [NEW] Ability to select up to 4 videos for synchronous playback during analysis
      [NEW] Specify an offset for each video independently to correct for video start time offset
      [NEW] Automatic scaling of signals from volts to base units when using MWX/MWI files from The MindWare Mobile
      [IMPROVED] Additional statistics written to output file
      [IMPROVED] Memory and performance optimization
      [IMPROVED] Support for a variety of video file formats
      [IMPROVED] Improved respiration derivation from Zo & dZ/dt
      [IMPROVED] Weighted IBI method used to calculate Heart Rate and Mean IBI in Interval mode
      [IMPROVED] Filter priming to eliminate filter ringing
      [IMPROVED] Improved ECG editing tools

    • Version 3.0.25 - 127 MB - Released 2012-08-01

      NOTE: 3.0.x Analysis Applications require data collected with BioLab 3.0.x or earlier

  • Impedance Cardiography Analysis (IMP)
    • Version 3.2.8 - 301 MB - Released 2020-09-15

      [FIXED] Fixed bug introduced in 3.2.7 which required an Excel file to be selected every time a segment is written

      3.2.7 (6/10/20)
      [NEW} Support for subscriptions and virtual perpetual licenses

      3.2.5 (10/29/19)
      [NEW] Support for .eeg files (Brain Vision, Cognionics, etc)
      [NEW] Support for Mangold INTERACT event import
      [FIXED] Video playback incompatible with Windows 10 on some computers
      [FIXED] Filtering the event list causes issues when selecting events to use
      [FIXED] ASCII-MW Converter can't handle commas in data values
      [FIXED] BioLab filter not stored properly in edit files
      [FIXED] Bernstein-Lemmens stroke volume calculation for Z0 > 20 ohms
      [FIXED] Digital event edge detection defaults to "Both" even when specific edge is selected

      3.2.4 (4/16/19)
      [FIXED] UDP event names not displayed properly
      [FIXED] Incorrect scaling applied when using BioLab filter
      [FIXED] Digital event value (amplitude) with .mwi files incorrect
      [FIXED] Ensemble average not updating from R peak editing once ensemble locations have been changed

      3.2.3 (10/30/18)
      [FIXED] BioLab filters not applied properly to .mw files
      [FIXED] Dragging multiple event sources into the event source to use table incorrectly calculates the number of events for each source
      [FIXED] Performing a data edit while zoomed in resets the zoom level
      [FIXED] Ensemble edits not saved properly in specific circumstances

      3.2.2 (7/24/18)
      [FIXED] "Extend >>" edit in Signal Editor incorrectly affects next segment if end time of current segment = start time of next segment
      [FIXED] Deleting a multi-event pair before specifying an end event causes drag and drop glitches
      [FIXED] Loading an edit file from version 3.1 and earlier disables the channel map
      [FIXED] Event settings occasionally not saved properly in the application configuration file
      [FIXED] Incorrectly applying scaling to some channels in AcqKnowledge files
      [FIXED] Incorrectly reading AcqKnowledge files with fractional sample rates (i.e. 62.5 Hz)
      [FIXED] Not properly tracking the low/high X cursors when determining the number of midbeats to insert in Signal Editor

      3.2.1 (5/15/18)
      [FIXED] Edits from edit file not applied properly when current segment includes within it a previously edited segment
      [FIXED] "Reset" option for setting video delay to delay determined by Noldus Media Recorder not available for videos 2-4
      [FIXED] Insufficient digits of precision on the X axis for the main signal graph
      [FIXED] Ctrl+H not jumping to the correct locations in the online manuals when used from the analysis screen
      [IMPROVED] Storing ECG and dZ/dt (when applicable) Invert setting in User Preferences configuration file
      [IMPROVED] Added timeout to adding Digital Event sources to prevent performance issues related to loading too many events (or selecting the wrong channel from which to detect events)
      [IMPROVED] Added support for MP4 and AVCHD video file types
      [IMPROVED] Detected R peaks which do not fall directly on a peak are automatically marked as an "estimate"

      3.2.0 (3/27/18)
      [NEW] Official Windows 10 support

      Setup
      [NEW] Streamlined events and modes setup with new options available
      [NEW] Add multiple event sources to use events from a variety of systems
      [NEW] Show events for reference when analyzing in Time mode
      [IMPROVED] More flexible event-based analysis, including the option to split an event-based segment into multiple smaller segments
      [IMPROVED] Improved Multi-Event (previously “Event to Event”) analysis support, allowing for quicker analysis of multiple event combinations
      [IMPROVED] Improved AcqKnowledge file read - files no longer need to be re-scaled or re-sampled before opening in MindWare
      [IMPROVED] Streamlined channel mapping emphasizes the use of edit files
      [IMPROVED] New edit file format stores important settings needed to reproduce the edited data. These settings are automatically recalled when the edit file is loaded

      Analysis
      [IMPROVED] Improved R peak detection using the Shannon Energy Envelope technique
      [NEW] Automatically ignore estimated peaks, improving reusability of edits between HRV and IMP
      [IMPROVED] Improved dZ/dt derivation from Z0
      [NEW] New optimization for the Kubicek stroke volume calculation to normalize spot electrodes with bands and transthoracic echocardiography
      [IMPROVED] Keyboard shortcuts for writing segments and searching through file for points of interest such as an unwritten segment or artifact

      Editing
      [NEW] Track good vs. estimated vs. bad R peaks, with point distribution visible at all times
      [NEW] Undo/redo edits
      [NEW] Save edits as you analyze instead of just when you are done
      [NEW] Expanded insert/delete all options using cursors
      [NEW] New channel display options
      [IMPROVED] Edit all channels simultaneously, or apply edits to each channel individually
      [IMPROVED] Keyboard shortcuts for selecting graph tools and scrolling through data
      [NEW] Click a point in the graph to learn why it is flagged as artifact

      Ensemble Editor
      [NEW] Undo/redo edits
      [NEW] Save edits as you make them
      [NEW] Recalculate ensemble point locations on demand

      Output
      [NEW] Write Excel output files without having Excel installed
      [NEW] Edit statistics worksheet contains point distribution and data edits summary
      [IMPROVED] Open an existing output for a given data file during analysis to continue writing to it in a new session. Automatically detect which segments have already been written

       

    • Version 3.1.7 - 205 MB - Released 2020-06-11

      [NEW} Support for subscriptions and virtual perpetual licenses

      3.1.6 (9/26/17)
      [FIXED] dZ/dt Calibration incorrectly applied when not set to 1 volt/ohm/sec. This is uncommon, and limited to data imported from non-MindWare systems

      3.1.5 (8/22/17)
      [FIXED] MESA events are incorrectly interpreted and displayed
      [FIXED] Time & Event mode produces an extra (empty) segment when the first segment exceeds the end of the file
      [FIXED] Spelling error on "Manual Override" setting
      [FIXED] Insufficient digits of precision on Threshold setting in Manual Override peak detection
      [FIXED] Previous ensemble edits are still applied after clearing "Use Edited Data" checkbox
      [FIXED] Using "Manual Override" peak detection can sometimes cause issues with peak detection in Ensemble Averages

      3.1.4 (12/20/16)
      [IMPROVED] MindWare event files (_event.txt) can be used when analyzing MWX/MWI files
      [FIXED] Loading a user configuration file in Event & Time mode can cause segmentation issues
      [FIXED] Setting a negative video offset whose absolute value is greater than the segment size would cause playback issues

      3.1.3 (4/26/16)
      [IMPROVED] Improved peak placement when multiple peaks are located in edit circle
      [FIXED] Fixed bug which caused occasional edit file corruption. Edit file corruption will now be detected and dealt with when edit file is loaded.

      3.1.2 (7/21/15)
      [FIXED] Fixed issue where digital events near end of AcqKnowledge (.acq) files are sometimes not detected
      [FIXED] Fixed problem with applying Daylight Savings Time to license expiration dates
      [FIXED] Fixed bug with applying Daylight Savings Time to exported event files
      [FIXED] BioLab filters can be used with MWX/MWI files in the analysis applications. The "Use BioLab Filter" option is now stored in the user preferences file.
      [FIXED] Fixed bug where LVETmin and LVETmax values sometimes default to 50 (should be 300 and 600, respectively)

      3.1.1 (12/2/14)
      [NEW] Application can be installed silently
      [IMPROVED] Installer digitally signed to prove authenticity
      [IMPROVED] After channel re-map, edit file is checked again to ensure channels correspond
      [IMPROVED] After channel re-map, if event channel has changed then events are redetected
      [IMPROVED] Added ability to select audio source by clicking on video stream (only 1 audio stream at a time)
      [IMPROVED] Forced videos to maintain aspect ratio when resized
      [IMPROVED] Added check to make sure channel names are valid Excel worksheet names
      [IMPROVED] Added description to Event Mode control
      [FIXED] Fixed bug with user-defined events and "All Instances" unchecked and there are duplicate events in the event list
      [FIXED] Fixed false positive error when checking if mapped channels match channels in edit file
      [FIXED] Fixed bug with quad video playback where 4th video did not play
      [FIXED] LVETmin and LVETmax default values set to 300 and 600 respectively (Framingham method)

      3.1.0 (9/2/14)
      [NEW] Windows 8.1 compatible
      [NEW] Excel 2013 compatible
      [NEW] Screen resizing on Analysis and Editor windows
      [NEW] Support for EDF & BDF file formats
      [NEW] Support for MWX/MWI file format (written by BioLab 3.1 and The MindWare Mobile)
      [NEW] Automatically check for software updates
      [NEW] Pre & Post Event mode allows for analysis of Pre- and Post-Event segments separately but during same analysis session
      [NEW] Event to Event + Time mode allows for analysis of data between 2 events in specified time intervals
      [NEW] Select multiple events to use for analysis
      [NEW] Identify events by Type or Name
      [NEW] Support for Noldus style event files
      [NEW] Ability to export events from an MWX/MWI file
      [NEW] Ability to select up to 4 videos for synchronous playback during analysis
      [NEW] Specify an offset for each video independently to correct for video start time offset
      [NEW] Automatic scaling of signals from volts to base units when using MWX/MWI files from The MindWare Mobile
      [NEW] New X and B point calculation methods
      [IMPROVED] Additional statistics written to output file
      [IMPROVED] Memory and performance optimization
      [IMPROVED] Support for a variety of video file formats
      [IMPROVED] Filter priming to eliminate filter ringing
      [IMPROVED] Improved ECG editing tools

    • Version 3.0.25 - 127 MB - Released 2012-08-01

      NOTE: 3.0.x Analysis Applications require data collected with BioLab 3.0.x or earlier

  • Study Compiler
    • Version 1.0.0 - 129 MB - Released 2012-02-15

Contact us for access to prior versions.

3rd Party Applications

The following are applications which are commonly used alongside MindWare software. These links will direct you to an external site where the software can be downloaded.

Demo Data

These files demonstrate various types of physiology and events. They can be used in any licensed application or 3.2+ applications in Demo Mode.

Interested in trying the applications with your own data?